{"title":"RGB2GO","description":"\u003cp\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0695\/8691\/1320\/files\/Screenshot_2026-06-25_110615.png?v=1782399992\" alt=\"\"\u003eAll products here are stocked and fulfilled by \"RGB2GO\". They have a wide range of controllers with Wireless or Ethernet options along with DMX Adapters.\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThese products will be shipped separately.\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eIf there are any question, please reach out to Jason at Jason@RGB2GO.com\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","products":[{"product_id":"solo2go-1-port-wi-fi-pixel-controller","title":"Solo2Go 1-Port Wi-Fi Pixel Controller","description":"\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003e1-Port Pixel Controller (upgradable to 5-Port w\/ the Differential Module)\u003c\/li\u003e\n\u003cli\u003eRevision 1.0\u003c\/li\u003e\n\u003cli\u003eWi-Fi support (2.4GHz only)\u003c\/li\u003e\n\u003cli\u003eESP32 Based\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #0061f4;\"\u003e\u003cstrong\u003eExpansion header (Ethernet, Differential, SD Card, 4-Button, IR Receiver and Audio-Reactive Modules available, sold separately)\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eWLED 0.15.0 pre-installed\u003c\/li\u003e\n\u003cli\u003eXLights Compatible\u003c\/li\u003e\n\u003cli\u003e5V Data Signal, 33 ohms\u003c\/li\u003e\n\u003cli\u003eModular and repairable\u003c\/li\u003e\n\u003cli\u003eSupports \u003cstrong\u003e24v, 12v \u0026amp; 5v\u003c\/strong\u003e pixels and strip (3 pin only, no CLK)\u003c\/li\u003e\n\u003cli\u003eRuns WLED software, pre-installed\u003c\/li\u003e\n\u003cli\u003eDimensions: 33mm x 98mm (roughly 1.5\" x 4\")\u003c\/li\u003e\n\u003cli\u003e5A MAX per output. (5A Total)\u003cbr\u003e(Over 200 LEDs per output should only exceeded only with proper voltage injection or reduced brightness)\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli style=\"font-weight: bold; color: #ff2a00;\"\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003eNOTE - Due to size constraints,. there is \u003cspan style=\"text-decoration: underline;\"\u003eNO REVERSE POLARITY PROTECTION\u003c\/span\u003e on the Solo2Go - Always double-check your power wiring!!! Reversed polarity will damage your controller and your lights.\u003cbr\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHow many pixels can it support?\u003c\/strong\u003e\u003cbr\u003eThe ESP32 can calculate about 65k-85k LEDs per second (that means 1000 LEDs @~70fps, 2000 LEDs @~35fps, 4000 LEDs @~18fps)\u003cbr\u003e\u003cbr\u003e* For excellent performance, it is recommended to use 400 pixels\/output  \u003cem\u003e\u003cstrong\u003e(RECOMMENDED)\u003cbr\u003e\u003c\/strong\u003e\u003c\/em\u003e\u003cbr\u003e*For very good performance, it is recommended to use 600pixels\/output\u003cbr\u003e*For good performance, you can use 800 pixels\/output \u003cbr\u003e*For okay performance, you can use 1000 pixels\/output\u003cbr\u003e\u003cbr\u003e\n\u003ch3\u003e\n\u003cspan style=\"text-decoration: underline;\"\u003e\u003cspan style=\"color: #0766f5; text-decoration: underline;\"\u003e\u003cbr\u003eOutput\u003c\/span\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: #0766f5;\"\u003ePort1: GPIO2\u003c\/span\u003e\n\u003c\/h3\u003e\n\u003ch3\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cspan style=\"color: #0766f5; text-decoration: underline;\"\u003e \u003c\/span\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003cspan style=\"color: #0766f5;\"\u003e \u003c\/span\u003e\u003c\/h3\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"RGB 2 Go","offers":[{"title":"Default Title","offer_id":44274947686488,"sku":"sku-44837547180197","price":29.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0695\/8691\/1320\/files\/20250320-080812_2923e122-9328-421c-8606-b34c57a2c2d5.jpg?v=1782351460"},{"product_id":"dmx2go-adapter","title":"DMX2Go Adapter","description":"\u003cp data-start=\"71\" data-end=\"134\"\u003e\u003cstrong data-start=\"71\" data-end=\"134\"\u003eDMX2Go Adapter — Seamless DMX Control\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-start=\"136\" data-end=\"526\"\u003eTake your lighting to the next level with the \u003cstrong data-start=\"182\" data-end=\"200\"\u003eDMX2Go Adapter\u003c\/strong\u003e, the essential add-on for the \u003cstrong data-start=\"231\" data-end=\"241\"\u003eRGB2Go\u003c\/strong\u003e family of pixel controllers. This compact module enables your controller to connect to and control a wide range of DMX-compatible devices—like \u003cstrong data-start=\"417\" data-end=\"430\"\u003ePAR lamps\u003c\/strong\u003e, \u003cstrong data-start=\"432\" data-end=\"448\"\u003emoving heads\u003c\/strong\u003e, \u003cstrong data-start=\"450\" data-end=\"466\"\u003efog machines\u003c\/strong\u003e, and more—all from the same system that drives your pixels.\u003c\/p\u003e\n\u003cp data-start=\"528\" data-end=\"718\"\u003eCompatible with both \u003cstrong data-start=\"549\" data-end=\"557\"\u003eWLED\u003c\/strong\u003e and \u003cstrong data-start=\"562\" data-end=\"578\"\u003eESPixelStick\u003c\/strong\u003e firmware, DMX2Go is a simple plug-and-play solution that works with the \u003cstrong data-start=\"651\" data-end=\"662\"\u003eSolo2Go\u003c\/strong\u003e, \u003cstrong data-start=\"664\" data-end=\"674\"\u003eDuo2Go\u003c\/strong\u003e, \u003cstrong data-start=\"676\" data-end=\"688\"\u003eTetra2Go\u003c\/strong\u003e, and \u003cstrong data-start=\"694\" data-end=\"705\"\u003eOcta2Go\u003c\/strong\u003e controllers.\u003c\/p\u003e\n\u003cp data-start=\"720\" data-end=\"1088\"\u003e\u003cstrong data-start=\"720\" data-end=\"749\"\u003eImportant for WLED Users:\u003c\/strong\u003e\u003cbr data-start=\"749\" data-end=\"752\"\u003eWhen using WLED, a \u003cstrong data-start=\"771\" data-end=\"796\"\u003ecustom firmware build\u003c\/strong\u003e is required (which we’ll provide). Due to how WLED handles DMX output, enabling DMX mode will \u003cstrong data-start=\"891\" data-end=\"929\"\u003edisable the standard pixel outputs\u003c\/strong\u003e—making the \u003cstrong data-start=\"941\" data-end=\"970\"\u003eSolo2Go the perfect match\u003c\/strong\u003e for dedicated DMX applications. It’s compact, budget-friendly, and tailor-made for single-output use cases like this.\u003cbr\u003eWLED also only supports a MAXIMUM of 16 channels, although we still recommend only using WLED with simple DMX devices with a max of around 4-5 channels. If using more, you may want to consider the ESPixelStick firmware.\u003c\/p\u003e\n\u003cp data-start=\"1090\" data-end=\"1107\"\u003e\u003cstrong data-start=\"1090\" data-end=\"1107\"\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-start=\"1108\" data-end=\"1444\"\u003e\n\u003cli data-start=\"1108\" data-end=\"1153\"\u003eAdds DMX512 output to any RGB2Go controller\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1154\" data-end=\"1221\"\u003eControl DMX lights like \u003cstrong data-start=\"1180\" data-end=\"1193\"\u003ePAR lamps\u003c\/strong\u003e, \u003cstrong data-start=\"1195\" data-end=\"1211\"\u003emoving heads\u003c\/strong\u003e, and more\u003c\/li\u003e\n\u003cli data-start=\"1222\" data-end=\"1296\"\u003eCompatible with \u003cstrong data-start=\"1240\" data-end=\"1248\"\u003eWLED\u003c\/strong\u003e (custom firmware provided) and \u003cstrong data-start=\"1280\" data-end=\"1296\"\u003eESPixelStick\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1297\" data-end=\"1372\"\u003ePlug-and-play with \u003cstrong data-start=\"1318\" data-end=\"1329\"\u003eSolo2Go\u003c\/strong\u003e, \u003cstrong data-start=\"1331\" data-end=\"1341\"\u003eDuo2Go\u003c\/strong\u003e, \u003cstrong data-start=\"1343\" data-end=\"1355\"\u003eTetra2Go\u003c\/strong\u003e, and \u003cstrong data-start=\"1361\" data-end=\"1372\"\u003eOcta2Go\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1373\" data-end=\"1444\"\u003eIdeal for hybrid setups combining pixels and traditional DMX lighting\u003c\/li\u003e\n\u003cli style=\"font-weight: bold; color: rgb(255, 42, 0);\" data-start=\"1373\" data-end=\"1444\"\u003e\n\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003eIMPORTANT: While most of our controllers support up to 24V, the DMX2Go ONLY SUPPORTS UP TO 12V. Don't connect this module to a controller powered by power supply \u0026gt;12V!\u003c\/strong\u003e\u003c\/span\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-start=\"1446\" data-end=\"1625\" data-is-last-node=\"\" data-is-only-node=\"\"\u003eWhether you're syncing pixel effects with a few DMX lights or running a full-blown show, the \u003cstrong data-start=\"1539\" data-end=\"1557\"\u003eDMX2Go Adapter\u003c\/strong\u003e gives you the flexibility and control to bring your vision to life.\u003c\/p\u003e","brand":"RGB 2 Go","offers":[{"title":"Default Title","offer_id":44274947719256,"sku":"sku-45057919385765","price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0695\/8691\/1320\/files\/rn-image_picker_lib_temp_4a238483-01e7-42af-aae6-2c4ac3496645.jpg?v=1782351460"},{"product_id":"octa2go-8-port-pixel-controller","title":"Octa2Go 8-Port Pixel Controller","description":"\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003e8-Port Pixel Controller \u003c\/li\u003e\n\u003cli\u003eRevision 1.0\u003c\/li\u003e\n\u003cli\u003eWi-Fi support (2.4GHz only)\u003c\/li\u003e\n\u003cli\u003eESP32 Based\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"color: #0061f4;\"\u003e\u003cstrong\u003eExpansion header (Ethernet, SD Card and Audio-Reactive, IR and 4-button Modules available, sold separately)\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli style=\"color: rgb(245, 0, 0);\"\u003e\u003cspan style=\"color: rgb(245, 0, 0);\"\u003e\u003cstrong\u003eEthernet option comes with a 10\/100 Ethernet module pre-installed and configured (Save $10 vs. buying them separately!)\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eWLED 0.15.3 pre-installed\u003cbr\u003e\u003cem\u003e(Open Source Software - \u003cspan\u003e EUPL v1.2 \u003c\/span\u003elicense)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSource Code:\u003c\/strong\u003e \u003ca href=\"https:\/\/drive.google.com\/file\/d\/1lK5Ju5fsY6PwVqAeN2CDKgXXXeLYecEe\/view?usp=drive_link\"\u003ehttps:\/\/drive.google.com\/file\/d\/1lK5Ju5fsY6PwVqAeN2CDKgXXXeLYecEe\/view?usp=drive_link\u003c\/a\u003e\u003c\/em\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003cem\u003eMore info:\u003c\/em\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cem\u003e\u003ca href=\"https:\/\/github.com\/Aircoookie\/WLED\" rel=\"noopener\" target=\"_blank\"\u003ehttps:\/\/github.com\/Aircoookie\/WLED\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003eXLights Compatible\u003c\/li\u003e\n\u003cli\u003e5V Data Signal, 33 ohms\u003c\/li\u003e\n\u003cli\u003eModular and repairable\u003c\/li\u003e\n\u003cli\u003eSupports 24v, 12v \u0026amp; 5v pixels and strip (3 pin only, no CLK)\u003cbr\u003e(You can use a different voltage on P1 than P2.\u003cbr\u003eP1 powers ports 1-4 and requires a settings jumper becasue it also supplies power to the ESP32 and must be stepped down.\u003cbr\u003eP2 does not require a jumper because it ONLY supplies power to ports 5-8)\u003c\/li\u003e\n\u003cli\u003eRuns WLED software, pre-installed\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDimensions: 165mm x 83.5mm (about 6.5\" x 3.25\")\u003c\/li\u003e\n\u003cli\u003e5A MAX per output. (40A Total)\u003cbr\u003e(Over 200 LEDs per output should only exceeded only with proper voltage injection)\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHow many pixels can it support?\u003c\/strong\u003e\u003cbr\u003eThe ESP32 can calculate about 65k-85k LEDs per second (that means 1000 LEDs @~70fps, 2000 LEDs @~35fps, 4000 LEDs @~18fps)\u003cbr\u003e\u003cbr\u003e* For excellent performance, it is recommended to use 250 pixels\/output  for a total of 2000 LEDs. \u003cem\u003e\u003cstrong\u003e(RECOMMENDED)\u003cbr\u003e\u003c\/strong\u003e\u003c\/em\u003e\u003cbr\u003e*For very good performance, it is recommended to use 400 pixels\/output for a total of 3200 LEDs.\u003cbr\u003e\u003cbr\u003e*For good performance, you can use 500 pixels\/output for a total of 4000 LEDs.\u003cbr\u003e\u003cbr\u003e*For okay performance, you can use 600 pixels\/output with 8 outputs for a total of 4800 LEDs. \u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan style=\"color: #ff2a00;\"\u003eReverse Polarity Protection*\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cem\u003e* Make sure to note that the protection circuit only safeguards the controller and not any attached LEDs. Keep in mind that if polarity is reversed, any connected LEDs may still be damaged. After connecting the DC power cable, ALWAYS try to power on the controller without any pixels first to ensure proper polarity.\u003c\/em\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003ch3\u003e\n\u003cspan style=\"text-decoration: underline;\"\u003e\u003cspan style=\"color: #0766f5; text-decoration: underline;\"\u003e\u003cbr\u003eOutputs\u003c\/span\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: #0766f5;\"\u003ePort1: GPIO2\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: #0766f5;\"\u003ePort2: GPIO13\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"color: #0766f5;\"\u003ePort3: GPIO12\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: #0766f5;\"\u003ePort4: GPIO14\u003cbr\u003e\u003c\/span\u003e\n\u003c\/h3\u003e\n\u003ch3\u003e\n\u003cspan style=\"color: #0766f5;\"\u003ePort5: GPIO4\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: #0766f5;\"\u003ePort6: GPIO16\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"color: #0766f5;\"\u003ePort7: GPIO32\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: #0766f5;\"\u003ePort8: GPIO33\u003c\/span\u003e\n\u003c\/h3\u003e\n\u003ch3\u003e\u003cbr\u003e\u003c\/h3\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"RGB 2 Go","offers":[{"title":"WiFi Only","offer_id":44274947752024,"sku":"sku-47441919967397","price":79.0,"currency_code":"USD","in_stock":true},{"title":"Ethernet","offer_id":44274947784792,"sku":"sku-47441920000165","price":89.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0695\/8691\/1320\/files\/20250110_072619.jpg?v=1782351467"},{"product_id":"diff2go-differential-transmitter-receiver-pair","title":"Diff2Go Differential Transmitter \u0026 Receiver Pair","description":"\u003cp\u003e\u003cstrong\u003eTake ANY pixel port on ANY controller and turn it into a single differential port!\u003c\/strong\u003e\u003cbr\u003eTransmitter converts pixel data to a differential signal via it's MAX485 chip.\u003cbr\u003eReceiver converts the differential signal back to pixel data.\u003cbr\u003eTransmitter and Receiver are connected via a user-supplied Ethernet cable (RJ45) that can be up to a maximum length of approximately 300ft.\u003cbr\u003e\u003cbr\u003eNO POWER is carried along the Ethernet cable - only data. The receiver will require it's own connection to a DC power supply.\u003cbr\u003eBoth Transmitter and Receiver support 5V and 12V. (Selectable by a jumper)\u003cbr\u003e\u003cbr\u003eComes with:\u003cbr\u003e1 x Single port Differential Transmitter\u003cbr\u003e1 x Single port Differential Receiver\u003c\/p\u003e","brand":"RGB 2 Go","offers":[{"title":"Default Title","offer_id":44274947850328,"sku":"sku-43604338999461","price":34.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0695\/8691\/1320\/files\/20250428_225320.jpg?v=1782351466"},{"product_id":"4-button-module","title":"4-Button Module","description":"\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003eREQUIRES a Solo2Go, Tetra2Go or Octa2Go\u003cspan\u003e \u003c\/span\u003e- Sold Separately \u003cbr\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003cstrong\u003e\u003cem\u003e(NOT compatible with the Duo2Go controller)\u003c\/em\u003e\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eElevate your lighting control with this versatile \u003cstrong\u003e4-Button Add-On Module\u003c\/strong\u003e, designed specifically for use with the Tetra2Go and Octa2Go Pixel Controllers. Whether you're crafting dynamic light shows or simply want quick access to your favorite effects, this module is your perfect companion.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour Momentary Buttons\u003c\/strong\u003e: Instantly trigger preset lighting effects with a simple press, bringing more interactivity and spontaneity to your display.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeamless Compatibility\u003c\/strong\u003e: Fully compatible with \u003cstrong\u003eWLED\u003c\/strong\u003e, one of the most popular and feature-rich software options for pixel lighting enthusiasts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlug-and-Play Design\u003c\/strong\u003e: Effortlessly integrate this add-on with your existing Tetra2Go or Octa2Go setup for an immediate upgrade.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact and Durable\u003c\/strong\u003e: Built for performance, this module is small enough to fit into tight setups while providing long-lasting reliability.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePerfect For:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOn-the-fly light adjustments during live events or performances.\u003c\/li\u003e\n\u003cli\u003eSimplified control for installations where quick effect changes are essential.\u003c\/li\u003e\n\u003cli\u003eEnthusiasts looking to enhance their lighting systems with intuitive, tactile controls.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBring your pixel lighting setup to the next level with this 4-Button Add-On Module and enjoy effortless control of your favorite effects with just a touch.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003e____________________________________________________________________________________________\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eTo set up:\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e1) Flash the base 0.15 version of WLED for your device\u003cbr\u003e2) Make sure the A\/R components have been disabled\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eConfig -\u0026gt; Usermods -\u0026gt; Audioreactive -\u0026gt; Digitalmic\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePin I2S SD: unused\u003c\/li\u003e\n\u003cli\u003ePin I2S WS: unused\u003c\/li\u003e\n\u003cli\u003ePin I2S SCK: unused\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e3) Enable the buttons:\u003cbr\u003e\u003cbr\u003e\u003cem\u003e\u003cstrong\u003eConfig -\u0026gt; LED Preferences\u003c\/strong\u003e\u003c\/em\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/3670\/1605\/files\/ButtonSetup.png?v=1736221271\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e4) Create your effect presets and note their ID #\u003cbr\u003e\u003cbr\u003e5) Assign your presets to the different types of button presses:\u003cbr\u003e\u003cbr\u003e\u003cem\u003e\u003cstrong\u003eConfig -\u0026gt; Time \u0026amp; Macros -\u0026gt; Button Actions\u003c\/strong\u003e\u003c\/em\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/3670\/1605\/files\/ButtonActions.png?v=1736221291\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"RGB 2 Go","offers":[{"title":"Default Title","offer_id":44274947817560,"sku":"sku-44630333587621","price":12.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0695\/8691\/1320\/files\/20250106_222232.jpg?v=1782351466"},{"product_id":"audio-reactive-module","title":"Audio-Reactive Module","description":"\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003eREQUIRES a Solo2Go, Tetra2Go or Octa2Go\u003cspan\u003e \u003c\/span\u003e- Sold Separately \u003cbr\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003cstrong\u003e\u003cem\u003e(NOT compatible with the Duo2Go controller)\u003c\/em\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eINMP441 Digital Output Sensor Module MEMS High Precision Omnidirectional Microphone Sensor Module for the Tetra2Go\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eRequires Audio-Reactive image of WLED (included when purchased with Tetra2Go)\u003cbr\u003eUse the following settings to enable:\u003cbr\u003e\u003cbr\u003e\u003cem\u003e\u003cstrong\u003eConfig -\u0026gt; Usermods -\u0026gt; Audioreactive\u003c\/strong\u003e\u003c\/em\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEnable the module\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePin I2S SD: 25\u003c\/li\u003e\n\u003cli\u003ePin I2S WS: 26\u003c\/li\u003e\n\u003cli\u003ePin I2S SCK: 27\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePreconfigured WLED image available for download here:\u003cbr\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/3670\/1605\/files\/WLED_0.14.0_Tetra_AudioReactive.bin?v=1705261229\" target=\"_blank\"\u003e\u003cspan\u003eWLED_0.14.0_Tetra_AudioReactive.bin\u003c\/span\u003e\u003c\/a\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Not all of WLED's effect are Audio Reactive. To choose an Audio reactive effect, choose an effect with a single eighth note by it \u003cbr\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/3670\/1605\/files\/Ar_enabled.jpg?v=1705260323\" alt=\"\" style=\"display: block; margin-left: auto; margin-right: auto;\"\u003e\u003cbr\u003eOnce you find an effect you like, spend some time adjusting the color palette and the effect timings to find something you love!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"RGB 2 Go","offers":[{"title":"Default Title","offer_id":44274947915864,"sku":"sku-42835631898789","price":9.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0695\/8691\/1320\/files\/ar3.jpg?v=1782351466"},{"product_id":"ethernet-module","title":"Ethernet Module","description":"\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003eREQUIRES a Solo2Go, Tetra2Go or Octa2Go\u003cspan\u003e \u003c\/span\u003e- Sold Separately \u003cbr\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003cstrong\u003e\u003cem\u003e(NOT compatible with the Duo2Go controller)\u003c\/em\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e10\/100 Mbps Wired Ethernet Module\u003cbr\u003eLAN 8720 Chipset\u003c\/p\u003e\n\u003cp\u003eRequires Ethernet-ready image of WLED (included when purchased with Tetra2Go\/Octa2Go)\u003cbr\u003eDownloadable here: \u003cbr\u003e\u003cspan\u003e\u003cstrong\u003eTetra2Go: \u003c\/strong\u003e\u003ca href=\"https:\/\/drive.google.com\/drive\/folders\/1XVffFzPUyI6bxxVbd-8a5q2whyF9Xca7?usp=drive_link\"\u003ehttps:\/\/drive.google.com\/drive\/folders\/1XVffFzPUyI6bxxVbd-8a5q2whyF9Xca7?usp=drive_link\u003c\/a\u003e\u003cbr\u003e\u003c\/span\u003e\u003cstrong\u003eOcta2Go:\u003c\/strong\u003e \u003cbr\u003e\u003ca href=\"https:\/\/drive.google.com\/drive\/folders\/1SzaueqighgvZr2lALfjbzEdyRkWbjFWn?usp=drive_link\"\u003ehttps:\/\/drive.google.com\/drive\/folders\/1SzaueqighgvZr2lALfjbzEdyRkWbjFWn?usp=drive_link\u003c\/a\u003e\u003cbr\u003e(Download the file that contains \"-eth\")\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eFor 0.14.x, use the \"ESP32Deux\" Ethernet type in the \"Wifi Setup\" menu\u003cbr\u003eFor 0.15.x, use the \"ESP32Deux\/Tetra2Go\" Ethernet type in the \"Wifi Setup\" menu\u003cbr\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cbr\u003eNOTE: WLED requires a gateway be set if you set your IP statically\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"RGB 2 Go","offers":[{"title":"Default Title","offer_id":44274947981400,"sku":"sku-42835467436197","price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0695\/8691\/1320\/files\/eth5.jpg?v=1782351466"},{"product_id":"dac2go-signal-converter","title":"DAC2Go Signal Converter","description":"\u003cp\u003eThe DAC is an amazing multipurpose device!\u003cbr\u003e\u003cbr\u003eIt's most popular use is allowing you to attach your dumb RGB pixels to your WS281x controller.  Simply attach the board on to the controller and program the controller as if the DAC were a single pixel! All of the dumb RGB pixels will behave together as programmed!\u003cbr\u003e\u003cbr\u003eThe DAC can be used alone or daisy-chained! Just treat each one as a separate pixel. \u003cbr\u003e\u003cbr\u003eThere are also more advanced uses! The DAC can also be used to drive relays or PWM devices! (eg. servos, fans)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eThe DAC is rated for a total of 5A.\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eGoing over this limit could blow your fuse or even damage the MOSFETs.\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eIf you are using servos, PLEASE ensure that their peak draw is no more than 5A.\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"RGB 2 Go","offers":[{"title":"Default Title","offer_id":44274947883096,"sku":"sku-42714417627301","price":24.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0695\/8691\/1320\/files\/20251008_205044.jpg?v=1782351466"},{"product_id":"ir-receiver-module-w-remote-no-battery","title":"IR Receiver Module (w\/ Remote - no battery)","description":"\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003eREQUIRES a Solo2Go, Tetra2Go or Octa2Go\u003cspan\u003e \u003c\/span\u003e- Sold Separately \u003cbr\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003cstrong\u003e\u003cem\u003e(NOT compatible with the Duo2Go controller)\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eREQUIRES a CR2032 battery (not included) - which we cannot ship internationally.\u003c\/span\u003e\u003c\/em\u003e\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp data-start=\"73\" data-end=\"416\"\u003eWe are proud to announce the \u003cstrong data-start=\"123\" data-end=\"145\"\u003eIR Receiver Module\u003c\/strong\u003e, a versatile and user-friendly add-on designed for the \u003cstrong\u003eSolo2Go,\u003c\/strong\u003e \u003cstrong data-start=\"201\" data-end=\"213\"\u003eTetra2Go\u003c\/strong\u003e and \u003cstrong data-start=\"218\" data-end=\"229\"\u003eOcta2Go\u003c\/strong\u003e LED pixel controllers. This compact module enhances your setup by allowing remote control functionality through an \u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eincluded\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong data-start=\"344\" data-end=\"373\"\u003e44-button infrared remote\u003c\/strong\u003e for convenient, wireless lighting control. Requires a CR-2032 battery (not included).\u003c\/p\u003e\n\u003cp data-start=\"418\" data-end=\"439\"\u003eKey features include:\u003c\/p\u003e\n\u003cul data-start=\"441\" data-end=\"1197\"\u003e\n\u003cli data-start=\"441\" data-end=\"534\"\u003e\n\u003cstrong data-start=\"443\" data-end=\"470\"\u003eSeamless Compatibility:\u003c\/strong\u003e Works effortlessly with the SoloGo, Tetra2Go and Octa2Go controllers.\u003c\/li\u003e\n\u003cli data-start=\"535\" data-end=\"674\"\u003e\n\u003cstrong data-start=\"537\" data-end=\"561\"\u003eSimple Installation:\u003c\/strong\u003e Plug-and-play design with full support for the \u003cstrong data-start=\"609\" data-end=\"634\"\u003evanilla WLED firmware\u003c\/strong\u003e—no additional usermod required.\u003c\/li\u003e\n\u003cli data-start=\"675\" data-end=\"869\"\u003e\n\u003cstrong data-start=\"677\" data-end=\"706\"\u003eExpanded Control Options:\u003c\/strong\u003e Access a wide range of features, including brightness adjustment, color selection, pattern switching, speed control, and power toggling, all at your fingertips.\u003c\/li\u003e\n\u003cli data-start=\"870\" data-end=\"1039\"\u003e\n\u003cstrong data-start=\"872\" data-end=\"897\"\u003eReliable Performance:\u003c\/strong\u003e The IR module responds instantly to remote commands, providing smooth, uninterrupted lighting control without needing Wi-Fi or mobile apps.\u003c\/li\u003e\n\u003cli data-start=\"1040\" data-end=\"1197\"\u003e\n\u003cstrong data-start=\"1042\" data-end=\"1074\"\u003eConvenience and Flexibility:\u003c\/strong\u003e Perfect for scenarios where remote control is needed without a smartphone, such as parties, events, or home installations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003e____________________________________________________________________________________________\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eTo set up:\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e1) Flash the base version of WLED for your device\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e3) Enable IR Receiver:\u003cbr\u003e\u003cbr\u003e\u003cem\u003e\u003cstrong\u003eConfig -\u0026gt; LED Preferences\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eSet the IR GPIO to \"4\", and choose the 44-key RGB remote.\u003cbr\u003eSave settings and pull the plastic battery-saver tab out from the bottom of the remote.\u003cbr\u003eYou are ready to go!\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/3670\/1605\/files\/Screenshot_20250210_224909_Captive_Portal_Login.jpg?v=1739248571\" alt=\"\"\u003e\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"RGB 2 Go","offers":[{"title":"Default Title","offer_id":44274947948632,"sku":"sku-44837469651109","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0695\/8691\/1320\/files\/20250210_224029.jpg?v=1782351466"},{"product_id":"differential-module","title":"Differential Module","description":"\u003cp\u003e\u003cb style=\"color: #ff2a00;\"\u003eREQUIRES a Solo2Go or Tetra2Go and a \u003c\/b\u003e\u003cspan style=\"color: #ff2a00;\" color=\"#ff2a00\"\u003e\u003cb\u003eDifferential\u003c\/b\u003e\u003c\/span\u003e\u003cb style=\"color: #ff2a00;\"\u003e Receiver - Sold Separately \u003cbr\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003e(NOT compatible with the Duo2Go or Octa2Go controllers)\u003c\/em\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/b\u003e(Not \"Smart\" mode compatible! Can not be daisy chained.)\u003cbr\u003eCurrently tested with Falcon v1.01 and v4.00 Receivers - will be testing more soon)\u003cbr\u003e\u003cbr\u003e4-Port Differential Transmitter Module for Tetra2Go (For a total of 8 ports!)\u003cbr\u003eMAX485 chipset-based Transceiver\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eCan function with vanilla WLED, but the GPIOs for the additional ports will need to be set.\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003e\n\u003cspan style=\"text-decoration: underline;\"\u003e\u003cspan style=\"color: #0766f5; text-decoration: underline;\"\u003eDifferential Outputs:\u003c\/span\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: #0766f5;\"\u003ePort5: GPIO27\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: #0766f5;\"\u003ePort6: GPIO26\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"color: #0766f5;\"\u003ePort7: GPIO25\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: #0766f5;\"\u003ePort8: GPIO33\u003cbr\u003e\u003c\/span\u003e\n\u003c\/h3\u003e\n\u003cp\u003e(These settings are set by default when using the provided WLED Differential image - included when purchased with Tetra2Go)\u003cbr\u003e\u003cbr\u003ePre-configured WLED image available here:\u003cbr\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/3670\/1605\/files\/WLED_0.14.0_Tetra_Diff4.bin?v=1705261287\" target=\"_blank\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eWLED_0.14.0_Tetra_Diff4.bin\u003c\/span\u003e\u003c\/a\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"RGB 2 Go","offers":[{"title":"Default Title","offer_id":44274948014168,"sku":"sku-42835467600037","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0695\/8691\/1320\/files\/diff2.jpg?v=1782351466"},{"product_id":"tetra2go-4-port-wi-fi-pixel-controller","title":"Tetra2Go 4-Port Wi-Fi Pixel Controller","description":"\u003cdiv\u003e\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003e4-Port Pixel Controller (upgradable to 8-Port w\/ the Differential Module)\u003c\/li\u003e\n\u003cli\u003eRevision 1.4\u003c\/li\u003e\n\u003cli\u003eWi-Fi support (2.4GHz only)\u003c\/li\u003e\n\u003cli\u003eESP32 Based\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #0061f4;\"\u003e\u003cstrong\u003eExpansion header (Ethernet, Differential, SD Card and Audio-Reactive Modules available, sold separately)\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eWLED 0.15 pre-installed\u003cbr\u003e\u003cem\u003e(Open Source Software - \u003cspan\u003e EUPL v1.2 \u003c\/span\u003elicense)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSource Code:\u003c\/strong\u003e \u003ca href=\"https:\/\/drive.google.com\/file\/d\/1lK5Ju5fsY6PwVqAeN2CDKgXXXeLYecEe\/view?usp=drive_link\"\u003ehttps:\/\/drive.google.com\/file\/d\/1lK5Ju5fsY6PwVqAeN2CDKgXXXeLYecEe\/view?usp=drive_link\u003c\/a\u003e\u003c\/em\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003cem\u003eMore info:\u003c\/em\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cem\u003e\u003ca href=\"https:\/\/github.com\/Aircoookie\/WLED\" rel=\"noopener\" target=\"_blank\"\u003ehttps:\/\/github.com\/Aircoookie\/WLED\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003eXLights Compatible\u003c\/li\u003e\n\u003cli\u003e5V Data Signal, 33 ohms\u003c\/li\u003e\n\u003cli\u003eModular and repairable\u003c\/li\u003e\n\u003cli\u003eSupports 5v, 12v and 24v pixels\/strip (3 pin only, no CLK)\u003c\/li\u003e\n\u003cli\u003eRuns WLED software, pre-installed\u003c\/li\u003e\n\u003cli\u003eDimensions: 115mm x 58mm (about 4.5\" x 2.25\")\u003c\/li\u003e\n\u003cli\u003e5A MAX per output. (20A Total)\u003cbr\u003e(Over 200 LEDs per output should only exceeded only with proper voltage injection)\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHow many pixels can it support?\u003c\/strong\u003e\u003cbr\u003eThe ESP32 can calculate about 65k-85k LEDs per second (that means 1000 LEDs @~70fps, 2000 LEDs @~35fps, 4000 LEDs @~18fps)\u003cbr\u003e\u003cbr\u003e* For excellent performance, it is recommended to use 512 pixels\/output with 4 outputs for a total of 2048 LEDs. \u003cem\u003e\u003cstrong\u003e(RECOMMENDED)\u003cbr\u003e\u003c\/strong\u003e\u003c\/em\u003e\u003cbr\u003e*For very good performance, it is recommended to use 800 pixels\/output with 4 outputs for a total of 3200 LEDs.\u003cbr\u003e\u003cbr\u003e*For good performance, you can use 1000 pixels\/output with 4 outputs for a total of 4000 LEDs.\u003cbr\u003e\u003cbr\u003e*For okay performance, you can use 1000 pixels\/output with 5 outputs for a total of 5000 LEDs. (only w\/ Differential module)\u003cbr\u003e\u003cbr\u003e*For okay performance, you can use 800 pixels\/output with 6 outputs for a total of 4800 LEDs. (only w\/ Differential module)\u003cbr\u003e\u003cbr\u003e*For okay performance, you can use 600 pixels\/output with 8 outputs for a total of 4800 LEDs. (only w\/ Differential module)\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan style=\"color: #ff2a00;\"\u003eReverse Polarity Protection*\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cem\u003e* Make sure to note that the protection circuit only safeguards the controller and not any attached LEDs. Keep in mind that if polarity is reversed, any connected LEDs may still be damaged. After connecting the DC power cable, ALWAYS try to power on the controller without any pixels first to ensure proper polarity.\u003c\/em\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003ch3\u003e\n\u003cspan style=\"text-decoration: underline;\"\u003e\u003cspan style=\"color: #0766f5; text-decoration: underline;\"\u003e\u003cbr\u003eOutputs\u003c\/span\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: #0766f5;\"\u003ePort1: GPIO2\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: #0766f5;\"\u003ePort2: GPIO13\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"color: #0766f5;\"\u003ePort3: GPIO12\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: #0766f5;\"\u003ePort4: GPIO14\u003c\/span\u003e\n\u003c\/h3\u003e\n\u003ch3\u003e\u003cspan style=\"color: #0766f5;\"\u003e \u003c\/span\u003e\u003c\/h3\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"RGB 2 Go","offers":[{"title":"Default Title","offer_id":44274948046936,"sku":"Tetra2Go","price":59.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0695\/8691\/1320\/files\/20250703_084023_1.jpg?v=1782351466"},{"product_id":"oled-display-module","title":"OLED Display Module","description":"\u003cp\u003e\u003cspan style=\"color: rgb(43, 0, 255);\"\u003e\u003cstrong\u003eNote: Working well with the 0.14.4 firmware, but NOT the 0.15 firmware yet.\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003eREQUIRES a Solo2Go, Tetra2Go, or Octa2Go - Sold Separately \u003cbr\u003e\u003c\/strong\u003e\u003cstrong\u003e\u003cem\u003e(NOT compatible with the Duo2Go controller)\u003c\/em\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003eBlue and Yellow, 0.96 inch OLED\u003cbr\u003e4-pin I2C Interface\u003cbr\u003e(GND, VCC, SCL, SDA)\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eResolution is 128 x 64; \u003cbr\u003eView angle is more than 160 degrees; \u003cbr\u003eSupporting voltage is from 3.3V to 5V DC; \u003cbr\u003ePower consumption during normal operation is 0.04W, full screen lit is 0.08W\u003cbr\u003e\u003cbr\u003e\u003cem\u003ePlease note that this product is NOT compatible with Falcon controllers. They use a 7-pin SPI OLED Display.\u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c!----\u003e","brand":"RGB 2 Go","offers":[{"title":"Default Title","offer_id":44274948079704,"sku":"sku-43742217306277","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0695\/8691\/1320\/files\/20240520_221327_e88b3869-9097-4d03-ba6e-608854317d27.jpg?v=1782351466"},{"product_id":"duo2go-wi-fi-pixel-controller-rev-2-0","title":"Duo2Go Wi-Fi Pixel Controller (Rev 2.0)","description":"\u003cdiv\u003eIn stock and ready to ship!\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003e2-Port Pixel Controller\u003c\/li\u003e\n\u003cli style=\"color: rgb(43, 0, 255); font-weight: bold;\"\u003e\u003cstrong\u003e\u003cspan style=\"color: rgb(43, 0, 255);\"\u003eRevision 2.0\u003c\/span\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eGreat for beginners!\u003c\/li\u003e\n\u003cli\u003e2.4 GHz Wi-Fi only\u003c\/li\u003e\n\u003cli\u003eESP32 Based\u003c\/li\u003e\n\u003cli\u003eWLED 0.15 pre-installed\u003cbr\u003e\u003cem\u003e(Open Source Software - \u003cspan\u003e EUPL v1.2 \u003c\/span\u003elicense)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSource Code:\u003c\/strong\u003e \u003ca href=\"https:\/\/drive.google.com\/file\/d\/1lK5Ju5fsY6PwVqAeN2CDKgXXXeLYecEe\/view?usp=drive_link\"\u003ehttps:\/\/drive.google.com\/file\/d\/1lK5Ju5fsY6PwVqAeN2CDKgXXXeLYecEe\/view?usp=drive_link\u003c\/a\u003e\u003c\/em\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003cem\u003eMore info:\u003c\/em\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cem\u003e\u003ca rel=\"noopener\" href=\"https:\/\/github.com\/Aircoookie\/WLED\" target=\"_blank\"\u003ehttps:\/\/github.com\/Aircoookie\/WLED\u003c\/a\u003e\u003c\/em\u003e\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eXLights Compatible\u003c\/li\u003e\n\u003cli\u003e5V Data Signal, 33 ohms\u003c\/li\u003e\n\u003cli\u003eModular and repairable\u003c\/li\u003e\n\u003cli\u003eSupports 12v \u0026amp; 5v pixels and strip (3 pin only, no CLK)\u003c\/li\u003e\n\u003cli\u003e5A MAX per output. (10A Total)\u003cbr\u003e(Over 200 LEDs per output should only exceeded only with proper voltage injection)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHow many pixels can it support?\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eThe ESP32 can calculate about 65k-85k LEDs per second (that means 1000 LEDs @~70fps, 2000 LEDs @~35fps, 4000 LEDs @~18fps)\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan style=\"color: #ff2a00;\"\u003eReverse Polarity Protection*\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cem\u003e* Make sure to note that the protection circuit \u003cspan style=\"text-decoration: underline;\"\u003eonly safeguards the controller\u003c\/span\u003e and \u003cstrong\u003enot any attached LEDs\u003c\/strong\u003e. Keep in mind that if polarity is reversed, any connected LEDs may still be damaged. After connecting the DC power cable, When configuring for the first time, ALWAYS try to power on the controller without any pixels attached first to ensure proper polarity.\u003c\/em\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003ch3\u003e\n\u003cspan data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cspan style=\"color: #0766f5; text-decoration: underline;\"\u003eOutputs\u003c\/span\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: #0766f5;\"\u003ePort1: GPIO2\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: #0766f5;\"\u003ePort2: GPIO13\u003c\/span\u003e\n\u003c\/h3\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"RGB 2 Go","offers":[{"title":"Default Title","offer_id":44274948112472,"sku":"Duo2Go","price":39.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0695\/8691\/1320\/files\/20241122_191727.png?v=1782351466"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0695\/8691\/1320\/collections\/Screenshot_2026-06-25_110615.png?v=1782400005","url":"https:\/\/www.midwestcoro.com\/collections\/rgb2go.oembed","provider":"Midwest Coro","version":"1.0","type":"link"}